Cork Roadbed ROLL, 6mm - S scale
Cork Roadbed, S Scale - 0.85" wide ROLL 6mm thick by 48 feet long. Creates 24 feet of S-scale roadbed when laid as two parallel strips.
-
*
Please select the S-Scale Track Style in use.
-
Cork has been the sub-roadbed material of choice for decades. It's all-natural, clean, provides an appropriate rise to create a ballast profile while helping to deaden the sound.
This product is 6mm thick and is used for S scale mainline track applications. Rolls are unique in being able to deliver long, sweeping curves without traditional joints. Unlike strips, rolls do not have a bevel edge. The slope of the ballast profile is created with a bead of caulk. Use a thin, steep application for highly groomed mainline tracks and a thicker, wider application for older or less-well maintained lines. We recommend DAP Alex or Dynaflex (Tan) caulk.
A single roll is 48-feet long. Laying two strips side-by-side will produce 24-feet of roadbed from a single roll.
There are two widths - Please select the correct width when ordering:
- Fine Scale - Strips are 0.875" wide and produce a roadbed surface 1.75" wide for use with 1.6" long ties.
- Classic - Strips are 1" wide and produce a roadbed surface 2.0" wide for use with 1.75" long ties (GarGraves) or 1.875" long ties (American Flyer).
Rolls allow roadbed to be shipped more economically than long strips! Five rolls (120 feet) fit in a single 14x14x4" box that doesn't require excess size shipping rates.
For other S Scale roadbed products, see:
- LR-CB-S6 for traditional 6mm thick bevel strips.
- LR-CR-B6 for 6mm thick x 8" wide sheets, 8-feet long.
- LR-CT-U6 for 6mm thick turnout/cross-over pads.
Quantity shown is reserved for our online store - you can order more than shown in-stock with no delivery delay.
