Cork Roadbed ROLL, HO Secondary Lines
Cork Roadbed, HO Scale - 0.75" wide ROLL 3mm thick by 50 feet long. Creates 25 feet of HO-scale roadbed when laid as two parallel strips.
PRICE BREAKS - The more you buy, the more you save
| 6+ | 11+ | 21+ |
| $10.87 | $10.40 | $9.94 |
Cork has been the sub-roadbed material of choice for decades. It's all-natural, clean, provides an appropriate rise to create a ballast profile while helping to deaden the sound.
This product is 3mm thick and is used for HO scale branchline and industrial track applications. Rolls are unique in being able to deliver long, sweeping curves without traditional joints. Unlike strips, rolls do not have a bevel edge. The slope of the ballast profile is created with a bead of caulk. Use a thin, steep application for highly groomed mainline tracks and a thicker, wider application for older or less-well maintained lines.
Note that standard commercial HO roadbed is 6mm thick! This is designed for branchline and other secondary trackage with a lower ballast profile.
A single roll is 50-feet long by 0.75" wide and produces a roadbed 1.5" wide.
Rolls allow roadbed to be shipped more economically than long strips! Six rolls (150 feet of roadbed!) fit in a single 10x10x4" box that doesn't require excess size shipping rates.
For other HO Scale roadbed products, see:
- LR-CB-H3 and LR-CB-H6 for traditional bevel strips in 3mm and 6mm thick options.
- LR-CS-U3 and LR-CS-U6 for 3mm and 6mm thick sheets.
- LR-CT-U3 and LR-CT-U6 for 3mm and 6mm thick turnout/cross-over pads.
